Ricoh BRG-P1 - Page 233

Action 2
• Replace registration sensor 1.
•
Replace trailing edge sensor 2.
Jam 10
(J028/J29/
J035)
Registration Late Jam: Tray 2 (PFU)
Message
Paper Misfeeed
Press the Form Feed button.
Cause
• Paper feed rollers slipped, could not feed paper
•
Paper caught, warped in paper feed path.
Details
After the paper fed from the tray, or when the paper was inverted for duplexing,
after the trailing edge sensor went ON, the registration sensor failed to detect
within the prescribed time.
Action 1 • Press [Form Feed] key on operation panel.
Action 2
• Replace inverter guide.
•
Replace TE sensor.
• Replace CTL board.
Jam 11 Registration Late Jam: Duplex Unit
Message
Paper Misfeeed
Press the Form Feed button.
Cause
• Paper feed rollers slipped, could not feed paper
•
Paper caught, warped in paper feed path.
Details
After the paper fed from the tray, or when the paper was inverted for duplexing, after
the trailing edge sensor went ON, the registration sensor failed to detect within the
prescribed time.
Action 1 • Press [Form Feed] key on operation panel.
Action 2
• Replace inverter guide.
•
Replace trailing edge sensor.
• Replace CTL board.
Error Codes
231