Ricoh Caplio R2 - Protecting Multiple Files at Once

98
Protecting Multiple Files at Once
To protect selected files all at once, follow the steps below.
1. Press the Playback button.
2. Press the 9 (Thumbnail) button twice.
The screen is divided into 12 frames and displays 12 still images at once.
3. Press the !"#$ buttons to select the first file of the
selection.
4. Press the M button.
The Playback menu appears.
5. Press the " button to select [PROTECT] and press the O
or $ button.
6. Press the !"#$ buttons to
select the next file of the
selection, and then press the O
button.
The Protect symbol appears in the upper-
right corner of the file.
7. Repeat Step 6 to select all the files
you wish to protect.
If you selected a file by mistake, you can deselect by selecting the file and
pressing the O button again.
8. Press the M button.
The display indicates that the selected images are being processed; once
finished, the display returns to the Thumbnail Display screen.
Note
To remove protection from multiple files, follow the same steps described above to select
them and remove protection.
Reference
For details on thumbnail display, see P.45.