113
Changing Camera Settings
Changing the Beep Sound Setting
(BEEP SOUND)
During operation, the camera generates four types of sounds: start
sound, shutter release sound, focus sound, and beep sound.
To change the beep sound settings, follow the steps below:
1. Display the setup menu.
For detailed operation, see P.107.
2. Press the !" button to select
[BEEP SOUND] and press the O
or
$
button
.
3. Press the !" buttons to select
the desired setting.
4. Press the O or # button.
5. If you pressed the # button in step
4, press also the M button.
This setting will be used until you change it.
Reference
For how to adjust volume, see P.114
Start sound : Sound when the camera power is turned on.
Shutter release sound : Sound when the shutter button is pressed.
Focus sound : When the focus is set, the camera generates the focus sound.
Beep Sound : If an impossible operation is attempted, the camera generates the beep sound.
Possible Settings
SHUTTER (Shutter release sound, Beep Sound)
ALL (all sounds on) *Setting upon purchase
To Next Page
Loading...
