83
MO-C1 Training
Slide 83
Caution about Paper Rolls
If the machine will not be used for a long period
where the temperature and humidity are high or
low, remove the paper rolls from the machine
and store them (in their original packing if
possible).
Paper exposed to a high or low temperature or
high humidity can absorb or lose moisture
causing it to curl and ripple, wrinkle, or fold.
If the rolls cannot be removed and stored, then
before the machine is used again, feed the
leading edge of the roll about 1,000 mm (39 in.)
and cut it off.
In previous models such as N-C3, the roll feeder unit is an enclosed space, so
the paper roll will not be exposed to the air outside the machine.
In the Mo-C1, the interior of the roll unit is exposed to the air, so if the rolls will
not be used for a long time, they should be put back in their original packaging.
If this cannot be done, feed the paper one or two rotations and cut off the paper,
as explained above.