88
MO-C1 Training
Slide 88
Printing the Nozzle Check Pattern - 2
5. Press [User Tools] on the operation panel.
6. Touch [Maintenance]
7. Touch [Clean Print-heads]
8. Select the print head(s) to clean then touch [Start], and
then follow the prompts to complete the cleaning.
9. Print another Nozzle Check Pattern, then check the results.
If the patterns have no broken lines, you have finished.
If there are still broken lines in one or more of the patterns,
clean the print heads again, and print another Nozzle
Check Pattern.
If lines still exist after the 3rd cleaning attempt, touch [Exit],
and then flush the print heads.
Flushing the print heads consumes a large amount of ink.
Never execute print head flushing until you have executed
print head cleaning at least 3 times.
10. Touch [Flush Print-heads].
11. Follow the prompts to complete print head flushing.
No additional notes
To Next Page
Loading...
