90
MO-C1 Training
Slide 90
If the Nozzle Check Pattern is No Good Even
After Three Cleanings and One Flushing
7. If the results are still not satisfactory, open
SP2100-002.
Enter the number of the print head that is
abnormal.
» Head 1, K1 (Black), enter 1
» Head 2, K2 (Black), enter 2
» Head 3, C (Cyan), enter 4
» Head 4, YM (Yellow/Magenta), enter 8
» All, (K, C, Y, M), enter 15
» If you need to flush more than one head (but not all).
add their entry numbers and then enter the sum.
» For example, to clean Head 2 and Head 3, add 2 + 4
and enter "6".
No additional notes
To Next Page
Loading...
