4. Paper Skew and Paper Jam Correction
When a roll of the paper is almost used up, the position of the roll in the pa-
per holder becomes unstable. In this case, image skew may occur. In the
worst case, paper jams may occur. To prevent such conditions, a paper
holder shaft [A] is used to secure the paper.
The printer jam sensor [B] located in the cutter unit detects paper jams. The
jam conditions are explained in section 2-2-3.
[A]
[B]
H068D008.wmf
August 7th, 1995 DETAILED SECTION DESCRIPTIONS
PRINTING
2-9
To Next Page
Loading...
