8000A6[H] (0051A6[H]) - User parameter switch 06
Bit 0: TTI 0: Off, 1: On
Bit 1: Not used
Bit 2: Closed network for transmission 0: Off, 1: On
Bits 3 to 7: Not used
8000A7[H] (0051A7[H]) - User parameter switch 07
Bits 0 to 4: Not used
Bit 5: Reception mode switchover 0: Disabled, 1: Enabled
Bits 6 to 7: Not used
8000A8[H] (0051A8[H]) - User parameter switch 08
Bit 0 and 1: Not used
Bits 2 and 3: Authorized reception
Bit 3 2 Setting
X 0 Disabled
0 1 Faxes from senders whose RTIs/CSIs are specified for this feature are
accepted.
1 1 Faxes from senders whose RTIs/CSIs are not specified for this feature
are accepted.
Bits 4 and 5: Not used
Bits 6 and 7: Forwarding (BRO only)
Bit 1 0 Setting
X 0 Disabled
0 1 Faxes from senders whose RTIs/CSIs are specified for this feature are
forwarded.
1 1 Faxes from senders whose RTIs/CSIs are not specified for this feature
are forwarded.
8000A9[H] (0051A9[H]) - User parameter switch 09
Bits 0 to 7: Not used
8000AA[H] (0051AA[H]) - User parameter switch 10
Bits 0 to 6: Not used
Bit 7: Halftone type 0: Error diffusion, 1: Dither
8000AB[H] (0051AB[H]) - User parameter switch 11
Bits 0 to 5: Not used
Bit 6: Printout of messages received while acting as a forwarding station (BRO only)
0: Off, 1: On
Bit 7: Not used
8000AC[H] (0051AC[H]) - User parameter switch 12
Bits 0 and 7: Not used
8000AD[H] (0051AD[H]) - User parameter switch 13
Bits 0 and 1: PSTN access method from behind a PABX
Bit 1 0 Setting
0 0 PSTN
0 1 Loop start
1 0 Ground start
1 1 Flash start
Bits 2 and 6: Not used
Bit 7: Automatic cutting of paper after 24 hours of idle time 0: Disabled, 1: Enabled
August 7th, 1995 SERVICE TABLES AND PROCEDURES
SERVICE RAM ADDRESSES
4-63
To Next Page
Loading...
