52
IF JAMS OCCUR
Very gently pull the original out of the feed-in
slot. Be careful not to tear it.
R
CAUTION:
• If the original sticks in the machine, or if you don’t think you can
remove it without tearing, remove the original from the exit instead.
See below.
1 Lift the Original Table.
2 Very gently pull the original out of the feed-
out slot. Be careful not to tear it.
If the original is jammed in the feed-in slot
If the original is jammed at the exit
R
SB032
SB033
SB034
To Next Page
Loading...
