To Next PageTo Next Page
Need help?Do you have a question about the Ricoh MP C4504 and is the answer not in the manual?
General| Resolution | 1200 x 1200 dpi |
|---|---|
| Duplex Printing | Yes |
| Memory | 2 GB RAM |
| Hard Disk Drive | 320 GB |
| Color Capability | Full Color |
| Print Speed | 45 ppm |
| Paper Capacity | Maximum: 4, 700 sheets |
| First Copy Time | 5.7 seconds (Color) |
| Functions | Print, Copy, Scan |
| Control Panel | 10.1" Smart Operation Panel |
| Scan Speed | 120 ipm |
| Scan Resolution | 600 dpi |
| Type | Multifunction |
| Scanner Type | Flatbed with ADF |
| Network Connectivity | Ethernet |
Details for US users on FCC Rules, device operation, and measures to prevent interference.
Guidance on using shielded cables and ferrite cores for emission limits and RF interference suppression.
Information on product recycling and compliance with e-waste regulations worldwide.
Explanation of the battery symbol for EU countries and instructions for proper battery disposal.
Specific handling requirements for Perchlorate Material for users in California.
Explanation of safety symbols (WARNING, CAUTION) and basic operational safety rules.
Safety precautions related to the machine's environment and avoiding flammable sprays or liquids.
Detailed safety instructions for handling power cords, plugs, and avoiding electrical hazards.
Safety guidelines for operating and handling the main machine, including warnings for spills, smoke, and toppling.
Precautions regarding internal components, high voltage hazards, and avoiding unauthorized disassembly.
Safety advice for handling machine supplies, particularly concerning battery replacement.
Details on media package contents and initial setup procedures for administrators and technicians.
Identification and description of front and back panel components, ports, and indicators.
Guidelines for positioning the Color Controller and required space for installation.
Information on machine dimensions, weight, and suitable operating environmental conditions.
Precautions and steps for safely moving the Color Controller to prevent damage or data loss.
Procedures for starting, shutting down, and restarting the main unit and Color Controller.
Instructions for shutting down and restarting the Color Controller unit independently.
Step-by-step guide for the initial configuration, setup, and power-up sequence.
