What to do if Ricoh M281 Copier displays SC error and cannot be used (machine-error SC)?
If the Ricoh Copier displays an SC error on the operation panel, rendering the machine unusable due to a machine error, try switching the main power from OFF to ON. This may resolve the issue.
What to do if Ricoh M281 Copier displays SC error and cannot be used (safety-related SC)?
If a safety-related SC is displayed on the Ricoh Copier's operation panel, preventing machine use, execute the CE reset SP mode, and then switch the main power from OFF to ON. This procedure may resolve the issue.
What to do if Ricoh M281 Copier displays SC error when a function is selected?
If the Ricoh Copier displays an SC error on the operation panel when a function is selected, preventing machine use (down-time mitigation), try switching the main power from OFF to ON.
General| Technology | Laser |
|---|---|
| Copy Resolution | Up to 600 x 600 dpi |
| Scan Resolution | Up to 600 x 600 dpi |
| Max Paper Size | A4 |
| Duplex Printing | Yes |
| Type | Multifunction Printer |
| Print Speed (Black) | 28 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Copy Speed | 28 cpm |
| Fax Resolution | 200 x 200 dpi |
| Paper Capacity | 250 sheets |
| Network Connectivity | Ethernet |
| Connectivity | USB 2.0, Ethernet |
To Next Page