Ricoh M281 Series - Registering the client machine(s)

Fax Connection Unit Type M24 (D3CP-05, 06, 07)
D255/D256 FAX OPTION 4 SM
 [User Tools] > [Machine Features] > [System Settings] > [Administrator Tools]
9. Check whether the aics version is displayed.
Registering the client machine(s)
 Do not register the remote machine in the client machine before registering the client
machine in the remote machine. Otherwise, registering the remote machine fails.
 Before starting this procedure, connect the network cable to the target machine(s), and
then configure the network settings.
1. On the remote machine, press the [User Tools] icon on the operation panel.
2. Press [Machine Features].
3. Press [System Settings].
4. Press [Administrator Tools].
5. Press [Program/Change/Delete Remote Machine].
6. Press [* Not Programmed], and then enter the IP address or host name of one of the
client machines.
 Up to six machines can be registered as the client machines.