Security Setting
D255/D256/M281/M282 2-144 SM
3. From [User Administrator Authentication], [Machine Administrator Authentication],
[Network Administrator Authentication], and [File Administrator Authentication], set the
administrator authentication setting to [On].
If this setting is off, tell the customer that this setting must be on before you do the installation
procedure.
Using Auto Erase Memory
The Auto Erase Memory function can be enabled by the following procedure.
1. Log in as the machine administrator from the control panel.
2. Select [Security Options] -> Press [OK]
3. Select [Auto Erase Memory Setting] -> Press [OK]
4. Select [On] -> Select [HDDErase]
5. Select the method of erasing the data from [NSA], [DoD], or [Random Numbers]. ->
Press [OK]
If you select [Random Numbers], enter the number of times that you want to overwrite. Then
press [OK].
6. Press [OK].
7. Press [Menu].
8. Log out.
Checking the Auto Erase Memory Status
If Auto Erase Memory is enabled, you can use the "Memory Erase Status" screen to find out
whether there is any data to be erased in the memory.
1. Press the [Menu] key -> Select [Memory Erase Status] ->Press [OK]
The Memory Erase status appears.
To Next Page
Loading...
Need help?
General