IFAX Specifications
SM 167 D255/D256 FAX OPTION
FAX OPTION
6.2 IFAX SPECIFICATIONS
Item Spec.
Connectivity:
Standard: Ethernet interface (1000BASE-T/100 BASE-TX/10
BASE-T)
Optional: IEEE 802.11a/b/g/n wireless LAN interface
Resolution:
200 × 100 dpi (Standard resolution), 200 × 200 dpi (Detail
resolution)
Transmission Time:
1 s (through a LAN to the server)
Condition: ITU-T #1 test document (Selerexe Letter)
MTF correction: OFF
TTI: None
Resolution: 200 × 100 dpi
Communication speed: 10 Mbps
Correspondent device: E-mail server
Line conditions: No terminal access
Document Size: Maximum Original Size: A4
E-mail File Format:
Single/Multi-part, MIME Conversion
Attached file fomrs: TIFF-F (MH, MR*, MMR*)
*: Full mode
Protocol:
Transmission: SMTP, TCP/IP
Reception: POP3, SMTP, IMAP4, TCP/IP
Data Rate:
1000 Mbps (1000 Base-T), 100 Mbps (100 Base-Tx), 10 Mbps
(10 Base-T)
Authentication
Method:
SMTP-AUTH, POP before SMTP, A-POP
Remark:
The machine must be set up as an e-mail client before
installation. Any client PCs connected to the machine through a
LAN must also be e-mail clients, or some features will not work
(e.g. Autorouting).
To Next Page
Loading...
