Ricoh M281 Series - ARDF IMAGE ADJUSTMENT (MP 501;601 ONLY); Registration

Image Adjustment
SM 4-9 D255/D256/M281/M282
Replacement
and Adjustment
4.4.3 ARDF IMAGE ADJUSTMENT (MP 501/601 ONLY)
Registration
A: Side-to-side Registration
1. Place the temporary test chart on the ARDF and make a copy from one of the feed
stations.
2. Check the registration, and adjust them using the following SP modes if necessary.
SP No. SP Name Adjustment Range
SP6-006-001
ADF Adjustment Side-to-Side Regist:
Front
±3.0 mm
SP6-006-002
ADF Adjustment Side-to-Side Regist:
Rear