Security Setting
D255/D256/M281/M282 2-142 SM
Using Auto Erase Memory
The Auto Erase Memory function can be enabled by the following procedure.
1. Log in as the machine administrator from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Next] three twice.
5. Press [Auto Erase Memory Setting].
6. Press [On].
7. Select the method of overwriting.
If you select [NSA] or [DoD], proceed to step 10.
If you select [Random Numbers], proceed to step 8.
8. Press [Change].
9. Enter the number of times that you want to overwrite using the number keys, and then
press [#].
10. Press [OK].
Auto Erase Memory is set.
11. Log out.
To Next Page
Loading...
