Fax Communication Features
D255/D256 FAX OPTION 156 SM
Field Content
Bcc Backup mail address
Subject From CSI or RTI (Fax Message No. xxxx)
Content Type Multipart/mixed
Attached files: image/tiff
Content Transfer Encoding Base 64, 7-bit, 8-bit, Quoted Printable
Message Body MIME-converted TIFF-F (MIME standards specify how
files are attached to e-mail messages)
Direct SMTP Transmission
Internet Fax documents can be sent directly to their destinations without going through the SMTP
server. (Internet Faxes normally transmit via the SMTP server.)
For example:
e-mail address: gts@ricoh.co.jp
SMTP server address: gts.abcd.com
In this case, this feature destination e-mail address (gts@ricoh.co.jp) is read as the SMTP server
address "gts.abcd.com", and the transmissions bypass the SMTP server.
Selectable Options
These options are available for selection:
With the default settings, the scan resolution can be either standard or detail. Inch-mm
conversion before TX depends on IFAX SW01 Bit 7. Detail resolution will be used if Super
Fine resolution is selected, unless Fine resolution is enabled with IFAX SW01.
The requirements for originals (document size, scan width, and memory capacity) are the
same as for G3 fax memory TX.
The default compression is TIFF-F format.
IFAX SW00: Acceptable paper widths for sending
IFAX SW09: Maximum number of attempts to the same destination
Secure Internet Transmission
SMTP Authentication:
User Tools > Machine Features > System Settings > File Transfer > SMTP Authentication