Ricoh M281 Series - SCANNER SERVICE MODE (MP 501;601 ONLY); SP1-XXX

Scanner Service Mode (MP 501/601 Only)
D255/D256/M281/M282 3-162 SM Appendix
3.13 SCANNER SERVICE MODE (MP 501/601 ONLY)
3.13.1 SP1-XXX
1005 [Erase Margin(Remote scan)]
1-005-001 Range from 0 to 5
mm
CTL* [0 to 5 / 0 / 1 / step]
1009 [Remote scan disable]
1-009-001 0:Enable
1:Disable
CTL* [0 or 1 / 0 / 1 / step]
1010 [Non Display ClearLight PDF]
1-010-001 0:Display
1:Nondisplay
CTL* [0 or 1 / 0 / 1 / step]
1011 [Org Count Disp]
1-011-001 0:ON 1:OFF CTL* [0 or 1 / 0 / 1 / step]
1012 [UserInfo Release]
1-012-001 0:No 1:Yes CTL* [0 or 1 / 1 / 1 / step]
1013 [Scan to Media Device Setting]
1-013-002 0:OFF 1:ON CTL* [0 or 1 / 1 / 1 / step]
1014 [Scan to Folder Pass Input Set]
1-014-001 0:OFF 1:ON CTL* [0 or 1 / 0 / 1 / step]