Ricoh MP C4504 User Manual

A-17
Color Controller Startup, Shutdown, and
Restart
The main unit and Color Controller have separate power switches. It is recom-
mended to keep Color Controller activated for normal operations.
Starting the Main Unit and Color Controller
Turn on the main power switch of the main unit.
Turn on the main power switch of Color Controller.
Turn on the power switch of Color Controller.
Shutting Down the Main Unit and Color Controller
Press the
Home
key on the control panel, and press the
[Fiery]
icon on the
[Home]
screen.
Press
[Fiery]
.
Press
[Restart Fiery]
.
Press
[Shut Down]
, and then press
[OK]
.
Turn off the main power switch of Color Controller.
r Do not turn off the main power switch of Color Controller when the
power indicator remains lit. Make sure the main power switch of Color
Controller is not lit before turning off the main power switch.
r Turning off the main power switch turns off the machine power com-
pletely. Use this switch only when necessary.
Turn off the main power switch of the main unit.
2. Using Color Controller

Ricoh MP C4504 Specifications

General

Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Memory	2 GB RAM
Hard Disk Drive	320 GB
Color Capability	Full Color
Print Speed	45 ppm
Paper Capacity	Maximum: 4, 700 sheets
First Copy Time	5.7 seconds (Color)
Functions	Print, Copy, Scan
Control Panel	10.1" Smart Operation Panel
Scan Speed	120 ipm
Scan Resolution	600 dpi
Type	Multifunction
Scanner Type	Flatbed with ADF
Network Connectivity	Ethernet