A-12
1
Getting Started
Guide to Components
CWB002
1. Power switch
See page A-17 “Color Controller Startup,
Shutdown, and Restart”.
2. Front side USB port
Port for installing system software, acti-
vating Fiery features, or printing from a
prepared USB flash drive.
3. Power indicator
When Color Controller is operating, the
LED is lit.
4. HDD access indicator
While Color Controller HDD is being ac-
cessed, the indicator flashes.
5. Not used (monitor port)
6. Not used (monitor port)
7. Back side USB ports
Ports for installing system software, acti-
vating Fiery features, or printing from a
prepared USB flash drive.
8. Network connector 10/100/1000Mbps
A port for connecting Color Controller to
a LAN.
9. Network connector 10/100/1000Mbps
A port for connecting Color Controller to
the main unit.
10. Power connector
11. Main power switch
See page A-17 “Color Controller Startup,
Shutdown, and Restart”.
12. Service switches (for service use
only)
13. LEDs (2-digit diagnostic display)
To Next Page
Loading...
