Ricoh GR III R02010 - Page 113

5
Sharing Images
111
Using the Camera with a Communication
Device
The camera can be operated from a communication device and the images
saved in the camera can be displayed on/imported to the communication
device by connecting both the devices via Bluetooth® or wireless LAN and
using the dedicated app “Image Sync”.
Memo ---------------------------------------------------------------------------------------------------------
• The captured images can be transferred to the communication device by specifying them in [File
Transfer] of the C1 menu. (p.99) The images can also be transferred automatically after shoot-
ing. (p.116) When the captured images are transferred, the camera is connected to the communica-
tion device via a wireless LAN.
• The Bluetooth® connection and the wireless LAN connection can be switched using the Image Sync.
• When using the camera with a communication device, refer to the operating manual of the device
and the Image Sync website. (p.116).
Caution -------------------------------------------------------------------------------------------------------
• The Bluetooth® function is disabled in the following case.
• When the camera is connected to an AV device
• The wireless LAN function is disabled in the following cases.
• B mode
• During the USB connection
• When the camera is connected to an AV device
• When the OS of the communication device is iOS, images with a size of 4 GB or more cannot be trans-
ferred.