Ricoh GR III R02010 - Basic Shooting Operation; Shooting in the Program Mode

2
Getting Started
44
Basic Shooting Operation
Shooting in the Program Mode
1 Set the mode dial to J while
pressing the lock button.
The exposure mode is set to [Program
AE] and the Live View is displayed.
2 Press z halfway.
Focus is adjusted, and exposure is set.
The distance is measured from up to 25
points and the green focus frame appears for
the area in focus.
3 Press z fully.
The image you have just taken is displayed
on the monitor (Instant Review) and saved.
Focus ----------------------------------------------------------------------------------------------------------
• The status lamp and the frame color show whether the
subject is in focus.
Focus Status Frame Color Status Lamp
Before focusing White Off
Subject in focus Green Green (on)
Unable to focus Red Green (blinks)
100
F5.6 400 1/400
Status lamp
Focus frame