Changing the Settings
118
4 Select whether to enter a Box name, and press e.
When [Cancel] is selected, proceed to Step 7.
When [Enter Name] is selected, the text-entry screen appears.
5 Enter a Box name.
Up to 32 single-byte alphanumeric charac-
ters and symbols can be entered.
The following operations are available.
abcd Moves the text selection cursor.
r/p Moves the text selection cursor up and down.
n Moves the text selection cursor to the right and left.
e Enters a character selected with the text selection cursor.
You can use the touch panel for the operations.
6 After entering the text, move the text selection cursor to 1,
and press e.
The confirmation screen appears.
7 After checking the setting, press e.
The D1 menu reappears.
Memo ---------------------------------------------------------------------------------------------------------
• If a name is not entered, the registration date and time will be the name.
• To change the name, select [Rename] in the D1 menu.
• To delete the setting, select [Delete Settings] in the D1 menu.
㹵 e r t y u i o pq
s d f g h j k la
z
123
x c v b n m
Cancel OK
To Next Page
Loading...
