51
Taking Pictures
Program Line ------------------------------------------------------------------------------------------------
• You can set the program line for J mode to [Max Aperture Priority] in [Program Line] of the A2
menu.
Bulb, Time, and Bulb Timer -------------------------------------------------------------------------------
• If the sensitivity is fixed at a certain sensitivity in N
mode, [B], [T], or [BT] can be set for the shutter speed.
Shutter Speed Operation
B
Bulb
Exposure is continued while z is pressed, and canceled when
the button is released.
T
Time
Exposure is started when z is pressed, and ended when the
button is pressed again.
BT
Bulb timer
Exposure is started when z is pressed, and ended after the set
time has elapsed.
Set the exposure time using r.
• [B] and [T] are available when [Drive Mode] is set to [Single Frame Shooting] or [Multi-exposure],
and [BT] is available when [Drive Mode] is set to [Single Frame Shooting], [Multi-exposure], [Interval
Shooting], or [Interval Composite].
• Operation is also possible using the optional cable switch (CA-3) in place of z. When using the
cable switch, connect it to the camera with the provided USB cable.
• [One Push AE in M Mode] in [Fn Button Setting] of the D2 menu does not work.
BT F5.6
800
To Next Page
Loading...
