4. Click on the Import/Export icon to open the window below
Select ‘Always Convert Using’ and ‘Always Embed Using’. In both drop down lists select ‘Internal RGB - Fraser (1998)’
as shown.
5. Now click on the ‘Advanced Printer Settings’ to open the window below.
Make sure that ‘Do Not Override’ under Colour Profile is selected next to all printers.
6. Now click on the [+] option to save your settings. Save the settings as ‘Subli Print’ and click OK to confirm. Then
click OK in the Colour Management window.
Import/Export Icon
Advanced Printer Settings Icon
12
CorelDRAW 10 - X4 Setup
To Next Page
Loading...
