Ricoh MP 2254 Series User Guide

1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
DCG015
2. Square the paper and load it print side up.
Do not stack paper over the limit mark.
DCG016
3. Carefully push the paper tray fully in.
• Various sizes of paper can be loaded in the paper trays by adjusting the positions of side fences
and end fence. For details, see "Changing the Paper Size in Paper Trays", Paper Specifications and
Adding Paper.
• You can load envelopes in the paper trays. When loading envelopes, place them in the correct
orientation. For details, see page 179 "Envelopes".
Loading Paper into the Bypass Tray
Use the bypass tray to use OHP transparencies, adhesive labels, translucent paper, and paper that
cannot be loaded in the paper trays.
9. Adding Paper and Toner
160

Ricoh MP 2254 Series Specifications

General

Brand	Ricoh
Model	MP 2254 Series
Category	All in One Printer
Language	English