Ricoh MP C3003 Series User Manual

• When replacing a toner or waste toner container or consumables with toner, make sure that the
toner does not splatter. Put the waste consumables in a bag after they are removed. For
consumables with a lid, make sure that the lid is shut.
• When removing jammed paper or replacing toner, avoid getting toner (new or used) on your
clothing. If toner comes into contact with your clothing, wash the stained area with cold water.
Hot water will set the toner into the fabric and make removing the stain impossible.
• When removing jammed paper or replacing toner, avoid getting toner (new or used) on your
skin. If toner comes into contact with your skin, wash the affected area thoroughly with soap and
water.
• Do not attempt to print on stapled sheets, aluminum foil, carbon paper, or any kind of
conductive paper. Doing so risks fire.
• Keep SD cards or USB flash memory devices out of reach of children. If a child accidentally
swallows an SD card or USB flash memory device, consult a doctor immediately.
Safety Information
21

Ricoh MP C3003 Series Specifications

General

Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Maximum Paper Size	A3
Copy Resolution	600 x 600 dpi
Print Speed	30 ppm
Connectivity	Ethernet, USB
Standard Functions	Print, Copy, Scan
Copy Speed	30 copies per minute
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux