Ricoh MP C3003 User Manual

Tab Item Settings
Administrator Tools Extended Security
Password Policy
Set "Complexity Setting" to [Level 1] or
[Level 2], press [Change] on the right
of "Minimum Character No.", and then
set the number of characters to 8 or
more.
For example, to set the number of
characters to 8, press the number key
"8", and then "#".
Even if you change the password
policy, passwords that have already
been registered can still be used. The
changed password policy will be
applied only to passwords specified or
changed subsequently.
Administrator Tools Auto Erase Memory
Setting
Select [On], and then select [NSA],
[DoD], or [Random Numbers].
If you set this to [Random Numbers],
set [Number of Erase] to three or more.
4. Changing [Scanner Features] Using the Control Panel
Tab Item Settings
General Settings Print & Delete Scanner
Journal
[Do not Print: Delete Oldest] or [Do not
Print: Disable Send]
5. Changing [Device Settings] via Web Image Monitor
Category Item Settings
Device Settings Date/Time
Set Date
Set the appropriate date.
Device Settings Date/Time
Set Time
Set the appropriate time.
Device Settings Date/Time
Time Zone
Set the appropriate time zone.
Changing MFP Settings During Operation
35

Ricoh MP C3003 Specifications

General

Print Technology	Laser
Print Speed	30 ppm (Black/Color)
Max Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Hard Disk Drive	250 GB
Monthly Duty Cycle	75, 000 pages
Duplex Printing	Yes
Copy Speed	30 cpm (Black/Color)
Type	Color Multifunction Printer
Copy Resolution	600 x 600 dpi
Max Paper Size	A3
Paper Capacity	4, 700 sheets
Connectivity	USB, Ethernet
Functions	Print, Copy, Scan, Fax
Paper Size	A4, A5, Legal, Letter, Executive
Warm-up Time	20 seconds
Dimensions	587 x 685 x 913 mm (with ARDF)