Ricoh MP C4503 - Page 119

Technical Bulletin PAGE: 2/9
Reissued: 05-Jan-16
Model: MET-C1ab_SOP/ MET-C1cde_SOP/ MET-C1yz_SOP/
Cor-C1_SOP/OR-C2_SOP/Z-C2_SOP
Date: 15-Aug-13
No.: RD147047z
Version
Program No.
Effective Date
Availability of RFU
1.43
D1501459B
October 2015 production
Not Available
1.42
D1501459A
October 2015 production
Not Available
1.41
D1501459
October 2015 production
Not Available
1.40
D1501457Z
June 2015 production
Not Available
1.39
D1501457Y
May 2015 production
Not Available
1.38
D1501457X
March 2015 production
Not Available
1.37
D1501457W
December 2014 production
Not Available
1.35
D1501457T
October 2014 production
Not Available
1.34
D1501457S
September 2014 production
Not Available
1.33
D1501457R
August 2014 production
Not Available
1.32
D1501457Q
June 2014 production
Not Available
1.30
D1501457P
April 2014 production
Not Available
1.29
D1501457N
March 2014 production
Not Available
1.28
D1501457M
January 2014 production
Not Available
1.25
D1501457L
December 2013 production
Not Available
1.24
D1501457K
December 2013 production
Not Available
1.22
D1501457J
November 2013 production
Not Available
1.21
D1501457H
October 2013 production
Not Available
1.20
D1501457G
October 2013 production
Not Available
1.19
D1501457F
August 2013 production
Not Available
1.17
D1501457E
1st Mass production
Not Available
Note: Definition of Availability of RFU via @Remote
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
For USA/Europe/Asia model
Version
Modified Points or Symptom Corrected
1.43
Specification Change:
Alert message appears when attempted to download files that are not supported of the
format, for example, PDF.
Symptom corrected:
Coordination of the touchscreen may shift.
Note that this firmware must be used in combination with Legacy UI version 1.29 or
later.
1.42
Specification Change:
More detailed logs can be collected.
Symptom corrected:
HDD may not be accessible with Smart Operation Panel immediately after rebooting the
machine.
1.41
Symptom corrected:
Security issues was resolved.
1.40
Symptom corrected:
- Screen may flicker, if System Auto Reset is performed while displaying the preferred
application.
- The operation panel remains blank and there is no response from the hard keys or touch