Ricoh MP C4503 - Page 144

Technical Bulletin PAGE: 1/1
Reissued: 05-Sep-14
Model: MET-C1ab_SOP/MET-C1cde_SOP/MET-C1yz_SOP/
Cor-C1_SOP/OR-C2_SOP/Z-C2_SOP
Date: 26-Nov-13
No.: RD147064d
RTB Reissue
The items in bold italics have been corrected or added.
Subject: Firmware Release Note: START_RICOH for eDC
Prepared by: N. Yoshida
From: 1st Tech Service Sect., MFP/Printer Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other (Firmware)
Action required
Service manual revision
Retrofit information
Tier 2
Application Update Release:
Smart Operation Panel
• This application is for use with the Smart Operation Panel.
• For the update procedure, see the System Maintenance section of the Smart Operation Panel
Type M3 service manual.
This RTB has been issued to announce the firmware release information for the START_RICOH
for eDC.
Version
Program No.
Effective Date
Availability of RFU
1.25
D1501435C_forEDC
December 2013 production
Not Available
1.22
D1501435B_forEDC
November 2013 production
Not Available
1.17.1
D1501435A_forEDC
June 2013 production
Not Available
-
D1501435_forEDC
1st Mass production
Not Available
Note: Definition of Availability of RFU via @Remote
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can be updated via SD card or eDC.
Version
Modified Points or Symptom Corrected
1.25
Other changes:
Minor changes were applied for the Japanese domestic model.
1.22
Other changes:
The icon for the photo manager app was added to the launcher screen for "start.ricoh".
1.17.1
Other change:
The design of the "start.ricoh" icon displayed on the home screen was changed.