Ricoh MP C4503 - Page 146

Technical Bulletin PAGE: 1/1
Reissued: 11-Nov-16
Model: MET-C1ab_SOP/ MET-C1cde_SOP/ MET-C1yz_SOP/
Cor-C1_SOP/OR-C2_SOP/Z-C2_SOP
Date: 15-Nov-13
No.: RD147066e
RTB Reissue
The items in bold italics have been corrected or added.
Subject: Firmware Release Note: ScanToME for eDC
Prepared by: E. Hinata
From: 1st Tech Service Sect., MFP/Printer Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other (Firmware)
Action required
Service manual revision
Retrofit information
Tier 2
Important Information about Normal/Smart Panel Firmware Updates
 When updating machine firmware, make sure NOT to install Smart Panel supported
firmware on a machine with a normal operation panel (and vice-versa). If you do, the
machine may not function as designed and product warranty may not apply.
 To avoid this, when updating the firmware, make sure that the numbers next to "NEW" and
"ROM" are the same on the operation panel.
 If you install the wrong firmware, repeat the update procedure and check the numbers
mentioned above.
This RTB has been issued to announce the firmware release information for the ScanToME for
eDC.
Version
Program No.
Effective Date
Availability of RFU
1.11
D1501444E_forEDC
November 2016 production
Not Available
1.10
D1501444D_forEDC
January 2014 production
Not Available
1.09
D1501444C_forEDC
December 2013 production
Not Available
1.08
D1501444B_forEDC
Initial release
Not Available
Note: Definition of Availability of RFU via @Remote
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Version
Modified Points or Symptom Corrected
1.11
Other changes:
Minor bug correction.
1.10
Symptom corrected:
- Minor bug correction
1.09
Other changes:
- The Smart Operation Panel supports unified Portuguese.
1.08
Initial release