Technical Bulletin PAGE: 2/2
Reissued: 23-Aug-16
Model: MET-C1ab_SOP/ MET-C1cde_SOP/MET-C1yz_SOP/
COR-C1_SOP/OR-C2_SOP/Z-C2_SOP
Modified Points or Symptom Corrected
Other changes:
- Supported RICOH SmartSDK v1.04.
Other changes:
- Supported RICOH SmartSDK v1.03.
Specification change
- Supports Web application API V1.02.
Other changes:
- Supported RICOH SmartSDK v1.02.
Specification Change:
- Web application API V1.01
Symptom corrected
The following may occur after the user awakens the machine from Energy Saver mode
from inside Web Image Monitor:
- Web Image Monitor is unable to obtain the machine status information from the
machine's Web application
- The LCD touch panel takes about 10 minutes to come on line