Ricoh MP C4503 - Page 85

Technical Bulletin PAGE: 1/3
Reissued: 27-Dec-16
Model: MET-C1ab_SOP
Date: 01-Aug-13
No.: RD147033n
RTB Reissue
The items in bold italics have been corrected or added.
Subject: Firmware Release Note: Fax
Prepared by: E. Hinata
From: 1st Tech Service Sect., MFP/Printer Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other (Firmware)
Action required
Service manual revision
Retrofit information
Tier 2
Important Information about Normal/Smart Panel Firmware Updates
 When updating machine firmware, make sure NOT to install Smart Panel supported
firmware on a machine with a normal operation panel (and vice-versa). If you do, the
machine may not function as designed and product warranty may not apply.
 To avoid this, when updating the firmware, make sure that the numbers next to "NEW" and
"ROM" are the same on the operation panel.
 If you install the wrong firmware, repeat the update procedure and check the numbers
mentioned above.
This RTB has been issued to announce the firmware release information for the Fax.
Version
Program No.
Effective Date
Availability of RFU
16.00.00
D1465557S
January 2017 production
Available
15.00.00
D1465557R
October 2016 production
Available
14.00.00
D1465557Q
June 2015 production
Available
13.00.00
D1465557P
June 2015 production
Available
12.00.00
D1465557N
April 2015 production
Available
11.00.00
D1465557M
October 2014 production
Available
10.00.00
D1465557L
August 2014 production
Available
09.00.00
D1465557K
May 2014 production
Available
08.00.00
D1465557J
March 2014 production
Available
07.00.00
D1465557H
January 2014 production
Available
06.00.00
D1465557G
December 2013 production
Available
05.00.00
D1465557F
November 2013 production
Available
04.00.00
D1465557E
September 2013 production
Available
03.00.00
D1465557D
1st Mass production
Available
Note: Definition of Availability of RFU via @Remote
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Version
Modified Points or Symptom Corrected
16.00.00
Symptom corrected:
- If logged in with user authentication, FAX settings for Auto Print FAX Journal
(SWUSR_03, bit7) and setting whether or not to include sender name in reports
(SWUSR_04, bit5) may change after logging out.
- SC899 may occur when logging out from a machine with the user authentication
enabled.
- Fax application may stall when recovering from energy saving mode.