Ricoh MP C4503 - Page 95

Technical Bulletin PAGE: 1/3
Reissued: 22-Dec-16
Model: MET-C1ab_SOP
Date: 01-Aug-13
No.: RD147038o
RTB Reissue
The items in bold italics have been corrected or added.
Subject: Firmware Release Note: Scanner
Prepared by: E. Hinata
From: 1st Tech Service Sect., MFP/Printer Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other (Firmware)
Action required
Service manual revision
Retrofit information
Tier 2
Important Information about Normal/Smart Panel Firmware Updates
 When updating machine firmware, make sure NOT to install Smart Panel supported
firmware on a machine with a normal operation panel (and vice-versa). If you do, the
machine may not function as designed and product warranty may not apply.
 To avoid this, when updating the firmware, make sure that the numbers next to "NEW" and
"ROM" are the same on the operation panel.
 If you install the wrong firmware, repeat the update procedure and check the numbers
mentioned above.
This RTB has been issued to announce the firmware release information for the Scanner.
Version
Program No.
Effective Date
Availability of RFU
02.26
D1465560R
January 2017 production
Available
02.25
D1465560Q
October 2016 production
Available
02.24
D1465560P
January 2016 production
Available
02.23
D1465560N
November 2015 production
Available
02.22
D1465560M
June 2015 production
Available
02.21
D1465560L
June 2015 production
Available
02.20
D1465560K
April 2015 production
Available
02.19
D1465560J
December 2014 production
Available
02.18
D1465560H
October 2014 production
Available
02.17
D1465560G
August 2014 production
Available
02.16
D1465560F
May 2014 production
Available
02.15
D1465560E
January 2014 production
Available
02.14
D1465560D
November 2013 production
Available
02.12
D1465560C
August 2013 production
Available
02.11
D1465560B
1st Mass production
Available
Note: Definition of Availability of RFU via @Remote
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Version
Modified Points or Symptom Corrected
02.26
Symptom corrected:
When a machine administrator logs in to the device, the "Scanner Features"
screen might suffer from low brightness and be unresponsive.
02.25
Symptom corrected:
- A user name that has been set to not be used as a "Destination" appears in Quick
Scanner.