1.Installation Requirements
2
1. Installation Requirements
Environment
–Temperature and Humidity Chart–
• Standard temperature range:
10 - 32°C (50 - 89.6°F)
• Standard humidity range:
15% to 80% RH
• Extended temperature range:
10 - 38°C (50 - 100.4°F)
• Extended humidity range:
10% to 90% RH
• Ambient illumination:
Less than 1,500 lux (do not expose to direct sunlight)
• Ventilation:
3 times/hr/person or more
• Ambient dust:
Less than 0.075 mg/m
3
(2.0 x 10
-6
oz/yd
3
)
• Avoid areas exposed to sudden temperature changes:
1) Areas directly exposed to cool air from an air conditioner.
2) Areas directly exposed to heat from a heater.
• Do not place the machine in areas where it can get exposed to corrosive gases and chemicals.
• Do not install the machine at any location over 2,000 m (6,500 ft.) above sea level.
• Place the machine on a sturdy and level base. (Inclination on any side should be no more than 5
mm.)
• Do not place the machine where it is subjected to strong vibrations.
To Next Page
Loading...
Need help?
General
