What to do if Ricoh M15 Printer Accessories show connection error?
If your Ricoh Printer Accessories display a connection error, there could be several reasons. First, ensure that both IPv4 and IPv6 are enabled. Another potential cause is the use of a false connection ID; in this case, verify that the network is properly established. As an additional step, exit SP or initial setting and wait until the connection has finished.
General| Brand | Ricoh |
|---|---|
| Model | M15 |
| Category | Printer Accessories |
| Language | English |
Details the installation of the Fax Option Type M15 (D3B3).
Provides step-by-step instructions for installing the fax option.
Outlines the sequence for installing the Fax Connection Unit.
Explains how to register client-side machines in the network.
Details the procedure for registering the remote machine.
Explains how to transfer SRAM data when replacing the FCU board.
Lists and explains error codes for the Fax Connection Unit.
Provides a list of general error codes and their suggested causes/actions.
Troubleshoots IP-Fax transmission failures related to IP address or host name.
Addresses issues when sending IP-Fax through a VoIP gateway.
Troubleshoots IP-Fax sending failures using an alias fax number.
Troubleshoots IP-Fax reception failures by IP address or host name.
Addresses issues when receiving IP-Fax via a VoIP gateway.
Troubleshoots IP-Fax reception failures using an alias fax number.
To Next Page
