Ricoh M15 - 3. Troubleshooting; Fax Connection Unit Error Code List

3. Troubleshooting
Fax Connection Unit Error Codes
Fax Connection Unit Error Code List
MACHINE_ERR_01
Error
Code
Suggested Cause Action
01(1) IPv4/IPv6 not enabled Enable IPv4 and IPv6
01(3) “Cancel” is pressed by user. -
01(4) A false connection ID is being used.
Check that the network is established.
01(5)
Network disconnected because of no
response within a specified time.
01(14)
• The machine either of destination or of
local is entering SP or Initial setting.
•
An established connection exists.
• Exit SP or initial setting.
• Wait until the connection has
finished.
MACHINE_ERR_02
Error
Code
Suggested Cause Action
02(5)
• Wrong IP address/hostname is used
•
The machine at destination power off
• LAN cable is disconnected
• Network is rebooting.
• Enter the correct IP address/Host
name
• Turn on the main power.
• Connect the LAN cable
• Wait until the rebooting has
finished.
25