Technical Bulletin PAGE: 8/13
Reissued: 17-Jan-17
Model: Vacuum Feed LCIT RT5100
NOTE: Step 3-2 and 3-3 have been added.
3-2 Remove the plates [A] (if installed) and [B] – (See step 3-3)
[A]
[B]
3-3. To remove plates [B] gently skew the plate as indicated in the picture below.
Some force is required.
Remark: When re-installing be sure to hook part [A] under the bottom plate.
[A]
To Next Page
Loading...
