1
Do not touch the parts a label indicates. The inside and surface of the fusing unit could be very hot.
Caution should be taken when removing misfed paper.
2
This label indicates the weight of the unit. However, this label is meant for customer engineers and
operators who have received training. Do not lift a unit that has this label.
3, 4, 5, and 6
Do not touch the parts a label indicates. Otherwise, an injury might occur.
7
Keep your fingers and other body parts away from moving parts. Do not pull out other units when
replacing the developer.
8
This unit uses a laser radiation. Do not attempt to disassemble or modify this machine.
9
For correct handling of the waste toner bottle, see page 19 "Handling the machine's supplies".
10 and 11
Keep your hands clear of the parts a label indicates. Otherwise, you might trap your fingers and an
injury might occur.
Three-tray Wide LCT
1
High temperature parts. Do not touch the parts which a label is put on. Otherwise, an injury might occur.
2. Safety Information for This Machine
22
To Next Page
Loading...
