Ricoh Pro 8200s User Manual

Operating Instructions
Replacement Guide: TCRU/ORU
For safe and correct use, be sure to read the Safety Information in "Read This First" before using the machine.

Ricoh Pro 8200s Specifications

General

Max Print Resolution	1200 x 4800 dpi
Print Resolution (Black)	1200 x 4800 dpi
Print Technology	Laser
Connectivity	Ethernet 10/100/1000Base-T
Weight	760.6 lbs
Duplex Printing	Yes
Warm-up Time	Less than 30 seconds
Supported Media Types	Plain paper, Envelopes
Network Connectivity	Ethernet 10/100/1000Base-T
Operating Systems Supported	Windows
Dimensions (W x D x H)	49.2" x 37.4" x 45.3"
Supported Media Sizes	Custom sizes

Summary

1. Before You Begin

What You Need

General Cautions

Turning Off/On the Power

Procedure for safely turning the machine's main power off and on.

Resetting the Replaceable Parts Counter

Instructions for resetting the counter after replacing components.

2. Replacing the Paper Feed Rollers

Replacing the Rollers in Tray 1

Step-by-step instructions for replacing paper feed rollers in Tray 1.

Replacing the Rollers in the Wide LCT

Detailed procedure for replacing rollers in the Wide Large Capacity Tray.

Replacing the Rollers in the ADF

Instructions for replacing paper feed rollers within the Automatic Document Feeder.

3. Development Unit

Replacing the Charge Unit/Cleaning Unit for Photoconductor Unit/Photoconductor Unit

Procedure for replacing the charge, cleaning, and photoconductor units.

4. Cleaning Unit for Intermediate Transfer Belt

Replacing the Cleaning Unit for Intermediate Transfer Belt

Step-by-step guide for replacing the cleaning unit for the intermediate transfer belt.

5. Transfer Unit

Replacing the Transfer Unit

6. Fusing Unit

Cleaning unit for the fusing unit

Replacing the Cleaning Unit for the Fusing Unit/Fusing Assembly

7. Developer

Replacing the Developer

8. Waste Toner Bottle

Before You Begin

Replacing the Waste Toner Bottle