What to do if Ricoh All in One Printer shows 'Remaining potential: Vr detection error (K)'?
If you're encountering a 'Remaining potential: Vr detection error (K)' issue with your Ricoh All in One Printer, the suggested solution is to replace the photoconductor unit.
What to do if Ricoh Pro 8320S All in One Printer shows 'Charge potential: Vd adjustment error (K)'?
If your Ricoh All in One Printer displays a 'Charge potential: Vd adjustment error (K)', the recommended action is to replace the charge unit.
What to do if Ricoh All in One Printer shows 'Exposure potential: Vpl adjustment error (K)'?
If you're experiencing an 'Exposure potential: Vpl adjustment error (K)' on your Ricoh All in One Printer, the suggested solution is to replace the charge unit.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Monthly Duty Cycle | 300, 000 pages |
| Operating System Compatibility | Windows, macOS, Linux |
| Connectivity | Ethernet, USB |
| Maximum Paper Size | 13" x 19.2" |
| Duplex Printing | Standard |
| Weight | 220 lbs |
Explains what SC codes are and how the machine displays them.
Lists common SC codes, their errors, and recommended procedures for resolution.
Addresses issues where paper is spotted with toner.
Describes black spots appearing at specific intervals on prints.
Details streaks parallel to the paper feed direction.
Covers extended, blurred streaks parallel to paper feed direction.
Addresses streaks appearing in solid-filled areas.
Describes irregular black streaks parallel to the feed direction.
Details two 13mm long vertical streaks near the leading edge.
Covers two 14mm wide streaks parallel to the paper feed direction.
Addresses issues with stained paper edges.
General section for uneven image density issues.
Discusses uneven density across the entire image.
General section for issues related to glossiness.
General section for issues related to toner fusing.
Addresses insufficient toner fusing on printed copies.
Discusses common causes and solutions for paper misfeeds.
Covers paper jams around the fixing side separation plate.
Explains how misfeeds are reported via messages and jam codes.
Addresses paper skew issues indicated by the J049 error code.
Discusses double feeding issues.
Discusses paper skew issues and their causes.
Covers issues related to double feeding of paper.
General section for paper misfeeding issues.
General section for image quality issues caused by paper feed.
Troubleshooting for SR5090/SR5100 finishers.
Addresses issues with delivered sheets not stacking correctly.
Covers issues with large delivered sheets not stacking correctly.
Troubleshooting for the multi-folding unit.
Discusses inaccurate folds or folding deviation.
Troubleshooting for the high capacity stacker.
Troubleshooting for the interposer.
Addresses paper jams from misfeeding or double feeding.
To Next Page
