When you select "0", the default value, the finisher folds the booklet according to the number of sheets
in the booklet, as shown below.
• 1–13 sheets: 1 time
• 14–15 sheets: 2 times
• 16–25 sheets: 3 times
The value set here is added to the default values, which are 1, 2, and 3. Set a negative value to reduce
the number of times the finisher folds booklets. Set -1, -2, or -3 to not fold booklets that have 1 to 13
sheets, 14 to 15 sheets, or 16 to 25 sheets, respectively.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Number of Folds for Booklet] 0 9 -3 1 time(s)
0822: [Paper Alignment for Booklet: With Feed]
Adjust the travel distance of the paper edge stopper for booklets in order to reduce horizontal variation
in paper alignment due to difference in size, thickness, and paper curl when using
Booklet Finisher
SR5080.
Press [+] to increase the travel distance, or [−] to decrease.
2. Details of Menu Items in Adjustment Settings for Skilled Operators
78
To Next Page
Loading...
