2. Clutch the handle of the waste ink bottle, and then lift up the bottle.
3. Hold the bottom of the waste ink bottle, and then tilt the bottle before removing it.
Remove the waste ink bottle while being careful of the tube inserted into the spout of the bottle.
4. Uncap the new waste ink bottle, and then attach the inner and outer caps of the used
waste ink bottle.
5. Wipe off any ink that dripped around the tube, and then install the new waste ink bottle.
When installing the waste ink bottle, insert the tube into the spout of the bottle.
Replacing Consumables
45
To Next Page
Loading...
