Ricoh Ri 1000 - Heat Press Equipment and Settings

18Version: [###] Classification: Internal Owner: [Insert name] 05/11/2020
All garment inks are required to reach a certain
temperature and time to be properly cured. If
this temperature or time is not properly adjusted
on your heat press, you risk the possibility of
the shirt washing out during the wash
cycle. Keep Heat Press at least 10 feet away
from printer.
 Heat Press Setting: 330˚F (165˚C) for 90
seconds.
 All prints can be run at this longer/colder setting
if you are alternating from light to dark.
 Pressure – Pressure should be set to a Medium
to Medium/High settings. If there is not enough
pressure, the ink will not cure and will wash out.
Use 40-50 PSI (6 boxes on the GeoKnight).
Heat Press Equipment