To Next PageTo Next PageWhat to do if Ricoh SP 112SU paper jams occur frequently?
If your Ricoh printer is experiencing frequent paper jams, try these solutions: Adjust the paper guides to eliminate any gaps between the paper and the guides. Avoid printing on both sides of the paper when printing images that use a lot of toner. Use supported paper types. Also, make sure not to load paper beyond the upper limit markings on the paper guide.
What to do if Ricoh SP 112SU Printer says Toner Almost Empty?
If your Ricoh printer is indicating that the toner is almost empty, prepare a new print cartridge.
What to do if my Ricoh SP 112SU Printer shows 'Printer Power Off (Communication Error)'?
If your Ricoh printer displays a 'Printer Power Off (Communication Error)' message, check the printer's power cord and ensure the power switch is turned on. Also, verify that the USB cable is properly connected.
What to do if my Ricoh Printer shows 'Out of Paper / Misfeed' error?
If your Ricoh printer displays an 'Out of Paper / Misfeed' error, load paper into the input tray.
Why does my Ricoh Printer feed multiple sheets of paper at once?
If your Ricoh printer is feeding multiple sheets, fan the paper before loading it, ensuring the edges are even. Check that the paper guides are correctly positioned and that you're using supported paper types. Avoid overloading the tray beyond the upper limit markings. Only add paper when the tray is empty.
What to do if Ricoh SP 112SU Printer paper does not feed smoothly?
If the paper in your Ricoh printer isn't feeding smoothly, make sure you're using supported paper types. Load the paper correctly, ensuring the paper guides are properly adjusted. If the paper is curled, straighten it before loading. Take the paper out of the tray, fan it well, reverse the top and bottom of the stack, and then put it back in the tray.
What to do if Ricoh SP 112SU Printer prints curled paper?
If the printed paper is curled when using your Ricoh printer, try loading the paper upside down in the paper tray. The paper may also be damp, so use paper that has been stored properly.
What to do if a Ricoh SP 112SU error occurs?
If an error occurs when printing with your Ricoh printer, try changing the computer or printer driver settings. Check that the printer icon name does not exceed 32 alphanumeric characters; shorten it if it does. Close any other applications that may be interfering with printing, and if the problem persists, close unneeded processes. Verify that you're using the latest printer driver.
Why is my Ricoh Printer printout blurred?
If your Ricoh printer's printouts are blurred, the paper might be damp, so use paper that has been stored properly. If you have enabled 'Toner Save', printing will be less dense. Also, condensation may have collected; if there's a rapid change in temperature or humidity, allow the machine to acclimatize before using it.
What to do if Ricoh SP 112SU prints images diagonally?
If images are printing diagonally on your Ricoh printer, adjust the paper guides to eliminate any gaps between the paper and the paper.
General| Duplex printing | No |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 600 DPI |
| Time to first page (black, normal) | 13 s |
| Print speed (black, normal quality, A4/US Letter) | 16 ppm |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 99 copies |
| Scan drivers | TWAIN |
| Maximum scan area | A4 (210 x 297) mm |
| Printing colors | Black |
| Maximum duty cycle | - pages per month |
| Number of print cartridges | 1 |
| Page description languages | GDI |
| Total input capacity | 50 sheets |
| Total output capacity | 10 sheets |
| Paper tray media types | Plain paper |
| Paper tray media weight | 60 - 105 g/m² |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Mobile printing technologies | Not supported |
| USB port | Yes |
| Direct printing | - |
| Standard interfaces | USB 1.1, USB 2.0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 300 W |
| Power consumption (standby) | 5 W |
| Power consumption (average operating) | 60 W |
| Server operating systems supported | Windows Server 2003, Windows Server 2008, Windows Server 2012 |
| Windows operating systems supported | Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
| Sustainability certificates | ENERGY STAR |
| Product color | Black, White |
| Market positioning | Home & office |
Weight and Dimensions| Depth | 368.5 mm |
|---|---|
| Width | 402 mm |
| Height | 163 mm |
Lists compatible paper specifications.
Fundamental steps for printing from a computer.
Resolving errors when paper size or type does not match settings.
Fundamental steps for making copies.
Detailed guide for TWAIN scanning.
How to change various machine parameters.
Process for updating the machine's firmware.
Step-by-step guide to replace the toner cartridge.
Important safety guidelines for cleaning the machine.
Basic troubleshooting for common machine problems.
Resolving issues with paper not feeding or getting jammed.
Detailed steps to clear jammed paper.
Diagnosing and fixing poor print output.
Explaining error codes displayed on the machine.
