What causes a moire pattern when copying with Ricoh SP 111 SU?
If a moire pattern is produced when copying with your Ricoh printer, the original probably has heavily lined or dotted areas. Switching the setting for image quality between [Photo] and [Text/Photo] may eliminate the moire pattern.
How to adjust the scanned image that is too dark or too light on Ricoh SP 111 SU?
If the scanned image from your Ricoh printer is too dark or too light, adjust the image density.
How to adjust copied pages that are too dark or too light on Ricoh SP 111 SU Printer?
If copied pages from your Ricoh printer are too dark or too light, adjust the image density.
How to fix Ricoh SP 111 SU that does not turn on?
If your Ricoh printer isn't turning on, ensure the power plug is firmly inserted into the wall outlet. Also, verify that the wall outlet is functional by testing it with another working device. The problem may be that the power cord is not connected properly.
Why is my Ricoh Printer feeding multiple sheets of paper?
If your Ricoh printer is feeding multiple sheets of paper at once, fan the paper well before loading it, ensuring the edges are even by tapping the stack on a flat surface. Make sure the paper guides are in the right position. Use supported types of paper and do not load paper higher than the upper limit markings on the paper guide. Only add paper when there is none left in the tray.
Why is the photocopied paper blank on Ricoh SP 111 SU Printer?
If the photocopied paper from your Ricoh printer is blank, the original was placed with the front and back reversed.
Why is the scanned image upside down on Ricoh SP 111 SU?
If the scanned image from your Ricoh printer is upside down, the original was placed upside down. Place the original in the correct orientation.
How to align copies from the exposure glass on Ricoh SP 111 SU Printer?
When copying from the exposure glass on your Ricoh printer, if the print area of the copy is out of alignment with the original, place the original copy side down, making sure that it is aligned to the rear left corner and pressed flat against the exposure glass.
Why is the scanned image distorted or out of position on Ricoh SP 111 SU Printer?
If the scanned image from your Ricoh printer is distorted or out of position, the original may have moved during scanning. Ensure you do not move the original during scanning.
Why is the whole printout blurred on Ricoh SP 111 SU Printer?
If the entire printout from your Ricoh printer is blurred, the paper may be damp, so use paper that has been stored properly. Also, printing is generally less dense if you enable the Toner Save feature. Condensation may have collected; if there's a rapid change in temperature or humidity, use the machine only after it has acclimatized.
Introduces names and functions of front and rear parts of the machine.
Explains the control panel buttons, indicators, and screen functions.
Lists supported paper sizes, types, and capacities for printing.
Step-by-step instructions on how to load paper into the input tray.
Explains how to resolve errors when paper size/type doesn't match settings.
Overview of scanning documents from a computer using TWAIN or WIA.
Steps to modify machine settings via the Smart Organizing Monitor.
Step-by-step instructions for replacing the print cartridge.
Basic troubleshooting steps for common issues like not turning on or printing.
Solutions for issues related to paper not feeding smoothly or jamming.
Procedures for automatically and manually removing jammed paper.
How to diagnose and fix issues affecting print quality.
Troubleshooting common printer-related errors and issues.
Solutions for common problems encountered during copying.
Troubleshooting common issues encountered during scanning.
Explains error codes displayed on the control panel and their solutions.
Explains messages shown in the utility and how to resolve them.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 10, 000 pages |
| Connectivity | USB 2.0 |
| Paper Capacity | 150 sheets |
| Paper Size | A4 |
| Duplex Printing | Manual |
| Supported Paper Sizes | A4, A5, B5 |
| Supported Paper Types | Plain paper, Recycled paper |
| Operating System Compatibility | Windows, Mac, Linux |
| Noise Level | 50 dB |
| Toner Cartridge | SP 111 |
To Next Page