What causes a moire pattern when copying with Ricoh Printer?
If a moire pattern is produced when copying with your Ricoh printer, the original probably has heavily lined or dotted areas. Switching the setting for image quality between [Photo] and [Text/Photo] may eliminate the moire pattern.
How to adjust the scanned image that is too dark or too light on Ricoh Printer?
If the scanned image from your Ricoh printer is too dark or too light, adjust the image density.
How to adjust copied pages that are too dark or too light on Ricoh Printer?
If copied pages from your Ricoh printer are too dark or too light, adjust the image density.
How to fix Ricoh SP 110 SU that does not turn on?
If your Ricoh printer isn't turning on, ensure the power plug is firmly inserted into the wall outlet. Also, verify that the wall outlet is functional by testing it with another working device. The problem may be that the power cord is not connected properly.
Why is my Ricoh SP 110 SU feeding multiple sheets of paper?
If your Ricoh printer is feeding multiple sheets of paper at once, fan the paper well before loading it, ensuring the edges are even by tapping the stack on a flat surface. Make sure the paper guides are in the right position. Use supported types of paper and do not load paper higher than the upper limit markings on the paper guide. Only add paper when there is none left in the tray.
Why is the photocopied paper blank on Ricoh Printer?
If the photocopied paper from your Ricoh printer is blank, the original was placed with the front and back reversed.
Why is the scanned image upside down on Ricoh Printer?
If the scanned image from your Ricoh printer is upside down, the original was placed upside down. Place the original in the correct orientation.
How to align copies from the exposure glass on Ricoh SP 110 SU?
When copying from the exposure glass on your Ricoh printer, if the print area of the copy is out of alignment with the original, place the original copy side down, making sure that it is aligned to the rear left corner and pressed flat against the exposure glass.
Why is the scanned image distorted or out of position on Ricoh SP 110 SU?
If the scanned image from your Ricoh printer is distorted or out of position, the original may have moved during scanning. Ensure you do not move the original during scanning.
Why is the whole printout blurred on Ricoh Printer?
If the entire printout from your Ricoh printer is blurred, the paper may be damp, so use paper that has been stored properly. Also, printing is generally less dense if you enable the Toner Save feature. Condensation may have collected; if there's a rapid change in temperature or humidity, use the machine only after it has acclimatized.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 600 dpi |
| Monthly Duty Cycle | Up to 10, 000 pages |
| Connectivity | USB 2.0 |
| Scanner Type | Flatbed |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 150 sheets |
| Operating System Compatibility | Windows, Mac |
| Paper Size | A4, A5, B5 |
| Type | Multifunction Printer |
To Next Page