4. [Density] Key
Use this key to adjust the copy density.
5. [ID Card Copy] Key
Use this key to perform an ID copy.
6. Screen
Shows the number of copies and the error code.
7. [Number of copies] Key
Use this key to change the number of copies.
8. [Stop/Clear] Key
When the machine is online, press this key to cancel an ongoing print job.
9. [Start] Key
Use this key to start copying.
10. Power Indicator
This indicator lights up blue when the machine is turned on. It flashes when a print job is received and while
printing or scanning is in progress.
11. Alert Indicator
This indicator lights up red when the machine runs out of paper or consumables, when the paper settings do
not match the settings specified by the driver, or when other errors occur.
It flashes slowly when the machine is almost out of toner.
1. Guide to the Machine
14
To Next Page
Loading...
