Ricoh SP 220 SFNW - Page 12

10
14. Press the [ ] or [ ] key to select [Wi-Fi], and then press the
[OK] key.
Network Settings
24
Wi-Fi
Ethernet
IPv4 Configuration
DSG084
15. Press the [ ] or [ ] key to select [WPS], and then press the
[OK] key.
Wi-Fi
67
Input SSID
Current Connection
WPS
DSH049
16. Press the [ ] or [ ] key to select [PIN], and then press the
[OK] key.
WPS Type
22
PIN
PBC
DSG096
17. Check the PIN code.
DSG098
PIN Code:
PIN
Connect Abort
XXXXXXXX
Write down the PIN code in case you might forget it.
18. Enter the machine’s PIN code (8 digits) on the router (access
point)’s web page.(The web page accessed in Step 2)
19. Execute WPS (PIN system) from the router (access point)’s
web page.
20. Press [Connect].
DSG098
PIN Code:
PIN
Connect Abort
XXXXXXXX
“Please wait for 2 minutes” appears and connecting with PIN
method starts.
21. Check the result.
Connection has succeeded:
PIN
Connection to AP
has Succeeded
EXIT
DSG368
• Press [EXIT] to return to the screen displayed in Step 16, and
then press the [User Tools] key to return to the initial screen.
Connection has failed:
PIN
Connection to AP
has Failed
EXIT
DSG369
• Press [EXIT] to return to the screen displayed in Step 16. Check
the configuration for the router (access point), then try the
connection again.
22. Configuring the Wi-Fi settings is complete.