Ricoh SP 8400DN Manual

6
• It is dangerous to handle the power cord plug with wet hands. Doing so
could result in electric shock.
R CAUTION:
• Be sure to push the plug of the power cord fully into the wall outlet. Partially
inserted plugs create an unstable connection that can result in unsafe
buildup of heat.
• If this machine is not going to be used for several days or longer at a time,
disconnect its power cord from the wall outlet.
• When disconnecting the power cord from the wall outlet, always pull the
plug, not the cord. Pulling the cord can damage the power cord. Use of
damaged power cords could result in fire or electric shock.
• Be sure to disconnect the plug from the wall outlet and clean the prongs
and the area around the prongs at least once a year. Allowing dust to build
up on the plug constitutes a fire hazard.
• When performing maintenance on the machine, always disconnect the
power cord from the wall outlet.
• Power Source
120–127 V, 12 A or more, 60 Hz
Please be sure to connect the power cord to a power source as above.
Handling the Main Machine
R WARNING:
• Be sure to locate the machine as close as possible to a wall outlet. This will
allow easy disconnection of the power cord in the event of an emergency.
• If the machine emits smoke or odours, or if it behaves unusually, you
must turn off its power immediately. After turning off the power, be sure
to disconnect the power cord plug from the wall outlet. Then contact your
service representative and report the problem. Do not use the machine.
Doing so could result in fire or electric shock.
• If metal objects, or water or other fluids fall inside this machine, you must
turn off its power immediately. After turning off the power, be sure to
disconnect the power cord plug from the wall outlet. Then contact your
service representative and report the problem. Do not use the machine.
Doing so could result in fire or electric shock.
• When replacing the Fusing Unit, turn the main power switch off and wait at
least 60 minutes before proceeding with the replacement.

Ricoh SP 8400DN Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	2.2 s
Print speed (black, normal quality, A4/US Letter)	60 ppm
Printing colors	Black
Maximum duty cycle	300000 pages per month
Number of print cartridges	1
Page description languages	PCL 5e, PCL 6, PostScript 3, RPCS
Internal memory	2048 MB
Processor frequency	1460 MHz
Total input capacity	- sheets
Maximum input capacity	4700 sheets
Duplex media weight	52 - 256 g/m²
Paper tray media types	-
Paper tray media weight	60 - 300 g/m²
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
ISO B-series sizes (B0...B9)	B4, B5, B6
Maximum ISO A-series paper size	A3
Cabling technology	10/100/1000Base-T(X)
Security algorithms	SNMPv3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Standard interfaces	RJ-45
Optional connectivity	USB 2.0, Wireless LAN
Product color	Grey, White
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1780 W
Power consumption (ready)	43.4 W
Power consumption (printing)	- W
Energy Star Typical Electricity Consumption (TEC)	2.672 kWh/week
Mac operating systems supported	Mac OS X 10.9 Mavericks
Server operating systems supported	Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Windows operating systems supported	Windows 8.1, Windows Vista

Weight and Dimensions

Depth	653 mm
Width	587 mm
Height	720 mm
Weight	57000 g